Symbols and messages

When the car is started, the system goes through a self-check diagnostic program. Some indicators and warning lights activate during this time, but they turn off again when the car is ready for use. Indicators, warning lights, and messages are displayed on the driver display. Some messages are accompanied by an audible signal.

Indicator symbols

Direction indicators

This symbol blinks when the indicator lights are operated. The left or right arrow symbol will blink continuously to indicate that the left or right indicator lights are activated.

One-pedal status

This symbol is displayed in grey when the function is enabled but not activated. When it is both enabled and activated, the symbol is green.

Ready

This symbol is displayed when the car is ready to drive, ignition on and in Drive (D) or Reverse (R).

Low beam

This symbol is displayed when the low beam is activated.

High beam

This symbol is displayed when the high beam is activated.

Adaptive driving beam

When adaptive driving beam is activated, the green symbol is displayed. When the function activates the high beams, the blue symbol is displayed.

Adaptive headlights

This symbol is displayed in green when the function is active, and the headlights adjust according to current road conditions. The symbol is displayed in yellow if there is a fault with the function.

Rear fog light

This symbol is displayed when the rear fog light is activated.

Position lights

This symbol is displayed when the position lights are activated.

Parking emergency brake

This symbol is displayed in green when the function is enabled. When it is disabled, the symbol is displayed in yellow.

Auto hold

This symbol is displayed when the function is activated.

Electronic stability control disabled

This symbol is displayed when the function is disabled.

Child lock

The left or right symbol is displayed when the matching child lock is enabled.

Hill descent control

This symbol is displayed in grey when the function is enabled but not activated. When it is both enabled and activated, the symbol is green.

Hill descent control disabled

This symbol is displayed if the function is disabled, for example due to overheated brakes.

Lane keep assist system disabled

This symbol is displayed if the function is disabled.

External charging connection

This symbol is displayed when a charging cable is connected to the car.

High voltage battery low

This symbol is displayed if the high voltage battery is close to being discharged.

Power limit

This symbol is displayed if car power is limited.

Electric parking brake

This symbol is displayed when the electric parking brake is in use.

Warning symbols

If a warning symbol stays on after the self-check diagnostics, or if a warning symbol appears and stays on while driving, it indicates that either an important function has been disabled, or that a serious fault occurs.

Power system fault

This symbol is displayed if a fault occurs with a power system component, including high or low battery temperature. It can be accompanied by instructions on the driver display.

12V battery charging fault

This symbol is displayed if a fault occurs with the 12V charging system.

Electronic stability control

This symbol is displayed continuously if a fault occurs with the function. When the function is active, such as when the car detects loss of traction on one or more wheels, the symbol is flashing.

Anti-lock brake system fault

This symbol is displayed if a fault occurs with the function.

Steering system fault

This symbol is displayed in yellow if the power steering performance is reduced or missing. It is displayed in red if there is a fault with the steering system.

Adaptive driving beam fault

This symbol is displayed if a fault occurs with the adaptive driving beam.

High beam fault

This symbol is displayed if a fault occurs with the high beam.

Low beam fault

This symbol is displayed if a fault occurs with the low beam.

Lamp height adjustment fault

This symbol is displayed if the lamp height cannot be adjusted.

Position light fault

This symbol is displayed if a fault occurs with the position lights.

Tire pressure monitoring system fault

This symbol is displayed if tire pressure is low in one or more tires. It is also displayed if a fault occurs with the tire pressure monitoring system itself.

Brake system fault

This symbol is displayed in yellow if a general fault occurs with the brake system, reducing brake effectiveness. It is displayed in red if brake fluid level is low, if a fault occurs with the brake fluid sensor, or if a fault occurs with electronic brake force distribution.

Lane keep assist system fault

This symbol is displayed if a fault occurs with the function.

Collision mitigation support front fault

This symbol is displayed if a fault occurs with the function.

Automatic lane change assist fault

This symbol is displayed if a fault occurs with the function.

Traffic sign information fault

This symbol is displayed if a fault occurs with the function.

Highway assist fault

This symbol is displayed if a fault occurs with the function.

Seat belt reminder

This symbol is displayed if the driver or a passenger seat belt is unfastened. If the light is on and the seat belts are fastened, it indicates a fault with the seat belt system.

Airbag fault

This symbol is displayed if a fault occurs with the airbag system or the pre-tensioner system.

Front passenger airbag off

This symbol is displayed when the front passenger airbag is disabled, and a child seat can be used in front passenger seat. If an adult is going to sit there, without a child seat, reactivate the airbag.

Front passenger airbag on

This symbol is displayed when the front passenger airbag is enabled to indicate that you must not place a child seat in the front passenger seat.

Acoustic vehicle alerting system fault

This symbol is displayed if a fault occurs with the function.

Life presence detection fault

This symbol is displayed if a fault occurs with the function.

Warning messages

Warning and malfunction messages appear in the driver display. Certain messages are accompanied by an audible signal and/or an illuminated symbol. Any faults should be taken care of before continuing to drive, so that the car can be driven safely with all functions working.

This section contains a list of messages, or parts of messages, that can appear on the driver display and a suggested solution or action to take when they appear. In the car, instead of <Function name>, the message displays which function has a fault.