Driver assistance
Low-speed emergency braking
The low-speed emergency braking function is a safety function that helps prevent collisions during low-speed reversing.
Warning
The low-speed emergency braking function is meant to assist the driver with parking, it is not a replacement for the driver. Obstacles, cars, or pedestrians could be undetected by the sensors and camera. Be aware of your surroundings. Failure to do so could result in death, serious injury, or damage to the car and objects around it.
The function combines information from the car's ultrasonic sensors and the rear camera to identify an imminent collision. In case of an imminent collision, the function activates the brakes. This function is active in the speed range 2–5 km/h.
Note
This function is only active when the car is reversing. Low-speed emergency braking is active by default at the start of each journey.
To turn on/off the low-speed emergency braking function
- Navigate to
Zeekr AD > Driving assist. - Press Low-speed emergency braking.
Limitations of the low-speed emergency braking function
The low-speed emergency braking function relies on the sensors and cameras around the car. See "Limitations of the driver assistance system sensors" for more information on sensor and camera limitations.